The Skateboarding Questions thread

[[Moose]]

I feel as though all of us have general knowledge of skating.
Some more than others of course, so I created this thread so you can ask skateboarding questions to skaters.

Wanna know why water is bad for your boards health? Then this is the thread for yo ass.

"WTF is wheelbite?" Ask in this thread, fool!

"Why does everyone love Mark Gonzales?" I don't know, but someone in this thread does.

You can ask questions in this thread without (too) much ridicule for your lack a knowledge in wheelyboarding.
So here's this thread, don't let it die too quickly guys

[Antwan]

why water is bad for your boards health?

"WTF is wheelbite?"

"Why does everyone love Mark Gonzales?"

Damages Your Board, Weakens it. Easier to Snap when soaked.

When your wheels are too close to the bottom of the deck and
cause you to scrape it up and if it's bad enough it can send you flying to the ground.

He's an Innovative Skateboarding Prodigy.

Did you have a question Moose?
I feel like I could answer anything about skateboarding..
Can't say I'd be 100% correct but I learned most of what I know from other Skaters.

[echoturbo]

this is pointless you can just ask briden

[[Moose]]

Briden sleeps though...I think.

I dont have any questions personally, but if somebody did, I guess they could ask it here and someone could answer.

[m.seven]

this is pointless you can just ask briden

true speak right there

[Fecal Face]

This thread makes me sad.

[NotedDerk]

If you don't understand absolutely everything about skating, get the fuck out!

[Goon_Panda]

I'll just go ahead and use this thread for its actual purpose.

Is Jerry gay?

[m.seven]

Is Jerry gay?

seinfeld,lewis,garcia,the mouse that fucks with tom..?

[Legba]

^NEVER, gay Jerrys spell their name with an i at the end.

Where dafukk is Aquil Brathwaite?!

[echoturbo]

Is Jerry gay?

i dont want to come to this thread anymore

[[THEME]]

I'll just go ahead and use this thread for its actual purpose.

Is Jerry gay?

Are you referring to Jerry Hsu?

There was a video where he "supposedly" came out of the closet and admitted to being gay. Not sure if he was trolling or not though. I can find the video if you want..

[Goon_Panda]

I meant Hsu. I've heard rumors and shit, I was just curious.

[knexzor]

Why are you guys bashing this thread? I think it's a good initiative since obviously some people on here don't skate. Scaring them off can't be a good thing; I mean, wouldn't it feel better to actually help them understand and appreciate skateboarding and perhaps even encourage them to start doing it?

Could someone explain to me what pricepoint boards/products are? Came across the term on the Slap forum but I couldn't tell what it was.

[m.seven]

i think this would be a good thread if some common sense is used,cause like you said not everyone here has that knowledge.
moose's questions are a good example,goon..sorry but asking if Jerry Hsu is gay isn't.
i believe pricepoint products are stuff like blanks,shop decks,etc.

[Goon_Panda]

Why did they get rid of Carlsbad?

[schnavolda]

Why did they get rid of Carlsbad?

they were rebuilding the whole school campus the gap was located on.

[Hitmanx123]

I meant Hsu. I've heard rumors and shit, I was just curious.

bi curious it seems

[The Mike]

what ever happened to people using google to search things they want to know about

[BladderBoy]

what ever happened to people using google to search things they want to know about

Maybe you should Google it.

[briden]

Why are you guys bashing this thread? I think it's a good initiative since obviously some people on here don't skate. Scaring them off can't be a good thing; I mean, wouldn't it feel better to actually help them understand and appreciate skateboarding and perhaps even encourage them to start doing it?

Could someone explain to me what pricepoint boards/products are? Came across the term on the Slap forum but I couldn't tell what it was.

Typically M7's explanation is right, no pro name means no royalties, or less colors are used so they cost less, but always be wary. Some companies use chinese wood for their price points, and canadian wood for the legit boards, so be mindful that sometimes you're really sacrificing the quality of your board for a few bucks.

[Oddity]

I'm pretty sure these are jokes but do any of these terms actually exist in skateboarding: raver babies, beer cats, goth juggler, ringworm tinkletoes, tuba tuva, whatgrass wamper, and zodiac boofer. All terms on this video:

[knexzor]

I have another question:
What is the reason for removing the 'lids' on bearings? I've been skating for about 10 years and never done it, have I been missing out?

[schnavolda]

I have another question:
What is the reason for removing the 'lids' on bearings? I've been skating for about 10 years and never done it, have I been missing out?

if you want to clean them you could take them off but have to put them back on again afterwards. they are there to protect the bearing so removing them when skating makes no sense at all.

[m.seven]

i knew guys that did it,claimed it made the bearings spin faster due to less friction from removing the shields.pretty sure they were full of shit.
i always bought the swiss bearings so no way i was gonna take em off,not with how much they cost.

[Fecal Face]

Most pros in the early 2000's took off their bearing shields. Don't ask me why.

[Legba]

Yeah, the rationale behind removing the shields is that it reduces friction and increases speed. I think its true. I used to do it in high school.....but I've always been rough on bearings...balls out...so I keep em on now. Abec 7 Black Panthers since 03.

& Oddity: I'm gonna ahead and say those are all joke terms. But if you're hankerin' for some odd skating terms, heres some weirdo Cali terms that never caught on with skating as a whole:
-Banana Foot: A term used to describe when someone lands a trick with their toe(s) hanging over the edge of their deck & touching the gorund (AKA Toe Touch/Drag).
-Apple Foot: Same as above^, but for heel(s).

[pawnluvguitarist]

I used to clean my bearings a lot, never popped off the shields though, seemed like a little too much effort and I didn't wanna fuck things up. Been skating Bones Swiss labyrinths for a few years now. Great bearings, didn't really notice any reduction in quality compared to the more expensive bones Swiss that I've used in the past.

[llamasrock]

Reds all the way! less than 20 bucks at my local shop and theyve served me perfectly for years

[Legba]

Yeah, you can never knock Reds' value. I think they were $12 at my local shop when I first started, then 14 a few years later. I dunno how much they are now lol. Rattle & Roll.

I've had a couple pairs of Labyrinths Pawn, they're ghostly-smooth!

[Antwan]

I haven't picked out a full setup in a few years but Reds were pretty standard.
Now I Tend to roll with "Burner" Decks and everything else Generic.
Guess I just stopped caring.. It never really affected the quality of my enjoyment when skating.
I was even a bit rash to approach an oldschool board but I got it as a gift, Learned to use it. No different.

Bearings get dirty. Just like everything else, You need to maintain it.
Guess it comes with buying brands. Haven't really felt the need to keep up with anything Lately.

Actually couldn't answer Knexzor's Posts. More to learn. Keep the thread.

[Slamooh]

be sure that removing shields on bearings is retarded
less friction = bullshit

/ engineer in mechanics

[Legba]

^Besides that, you're getting rid of their best defense against the elements. So they get all grimy a lot quicker.
So, do you think pro's just do it cuz it looks cooler?

[pawnluvguitarist]

Yeah, you can never knock Reds' value. I think they were $12 at my local shop when I first started, then 14 a few years later. I dunno how much they are now lol. Rattle & Roll.

I've had a couple pairs of Labyrinths Pawn, they're ghostly-smooth!

Yeah, after trying all the different bones Swiss, the Labyrinths really are the best bang for your buck. I tried the Ceramics once, they were great, just too expensive

[Antwan]

^Besides that, you're getting rid of their best defense against the elements. So they get all grimy a lot quicker.
So, do you think pro's just do it cuz it looks cooler?

I bet they do and I bet they just throw the whole board out and get a new one when they get dirty.
Oh, Bearings are shot. Send me some new boards stat.

[Fecal Face]

Pros do it for the ritual. Just like some people microwave their shoes.

For the record, I microwave my Adidas.

Anyways, yeah if you pop off the shields your skating gets hella loud.

[Legba]

^Word? So you're saying its along the same lines as avoiding decks with red top-plys, freezing your wheels, tapping your board on the top stair before you try a set? Interesting, I never heard that given as an explanation for the shield shit. Makes a lot of damn sense when you look at it like that. Hmm, this thread has proven useful.

[schnavolda]

microwaving your shoes is a thing i'll never understand but i guess that's due to the fact that i never skate in brand new shoes.

i do the board tapping and stuff like that, maybe a little ocd, but a lof of people do that. watch willow always spinning the board around in his hand before starting to run.

[Goon_Panda]

Why the fuck do you microwave your shoes?

Also...

Is it true that if you sandpaper the tread off the soles of your shoes, that you get better grip on the board? Seems legit because the griptape will be touching almost twice as much shoe.

Weird trend where I live.

[schnavolda]

Why the fuck do you microwave your shoes?

to break in shoes faster and get stiff soles softer i guess.

my friends say that if you microwave a new shoe for 15 or 20 seconds, bend the sole immediately and then put it on, it molds around your foot better and if you then skate it, it feels like you were wearing it for weeks.