The Park builders thread for Tip's, Tricks, and Ideas!!!!!!!!!!!!

[OGBMX420]

i got a tip and a question . first the tip if u put anouther pad beside the prop, it will stay in good and tight and right where u want it for when u flip the pad over for the rail to merge through . Next my question, could someone post a pic of how to do the basketball hoop ive been having a problem with that . And when i try to use some of the props they fall threw no matter what ?

[OGBMX420]

i got a tip and a question . first the tip if u put anouther pad beside the prop, it will stay in good and tight and right where u want it for when u flip the pad over for the rail to merge through . Next my question, could someone post a pic of how to do the basketball hoop ive been having a problem with that . And when i try to use some of the props they fall threw no matter what ?

like so i could use without the wood mega pad ? trying to build a basketball court for an elementary school im building

[briden]

Was this kind of what you're aiming for?




The basketball hoop was one of the tougher ones, but it's all just a matter of breaking it down to what needs to be constrained. In this case, I constrained movement in all 4 directions as it tended to tip after the drop. Here's a picture of what the hoop looked like, before the flip, with the enveloping piece removed to show full detail. PS: The enveloping piece I used for this was the middle-height Vert ground pad.



The final height of the hoop is determined by the position of the upper-right pad, as it stops the base of the hoop after everything gets flipped. Moving it higher would end up with a higher hoop, and vice versa. Hope this helps.

[OGBMX420]

Was this kind of what you're aiming for?




The basketball hoop was one of the tougher ones, but it's all just a matter of breaking it down to what needs to be constrained. In this case, I constrained movement in all 4 directions as it tended to tip after the drop. Here's a picture of what the hoop looked like, before the flip, with the enveloping piece removed to show full detail. PS: The enveloping piece I used for this was the middle-height Vert ground pad.



The final height of the hoop is determined by the position of the upper-right pad, as it stops the base of the hoop after everything gets flipped. Moving it higher would end up with a higher hoop, and vice versa. Hope this helps.

Thanks u so much it was pissing me off i thought i could only use the wood mega pad could u post a couple more pics like side views and maybee it elavted much appreciated THANKS BRIDEN the only outher problem is my park is starting to earthquake in one spot ( On a side wall out of all places lol at least it wont effect the park or the skateable stuff ) but im going to put in work and save it

[OGBMX420]

Thanks u so much it was pissing me off i thought i could only use the wood mega pad could u post a couple more pics like side views and maybee it elavted much appreciated THANKS BRIDEN the only outher problem is my park is starting to earthquake in one spot ( On a side wall out of all places lol at least it wont effect the park or the skateable stuff ) but im going to put in work and save it

the top pic is dead on for what i want

[OGBMX420]

did u figure out my tip before i posted it ?

[Ohmidineffect]

Just out of curiosity does something like this increase the chances of your game glitching and causing earthquakes and ghost pads to occur? It just looks like something that would do that sort of thing.

[briden]

did u figure out my tip before i posted it ?

Yeah, I mentioned it a few posts back. Where are you getting confused with the basketball hoop though?

Just out of curiosity does something like this increase the chances of your game glitching and causing earthquakes and ghost pads to occur? It just looks like something that would do that sort of thing.

The more you constrain movement, the less glitching/quaking. Ghost pads can happen to any elevated ground piece though, I haven't had it worse with this than in any other park where it happened.